She is BACK!

Zheiko

Octane Boostaholics
So, today I finally collected my red Hawk from Dave, and she drives better than ever.

Dave did outstanding job and had the whole thing fixed in few hours, if I knew that I will get stuck on such stupid thing, I would not waste time and drove it to him right away.

Currently I will still need to change wheel bearings and do some bodywork(repaint other 3 wheels, change the fender). So soon she should be back and even better than before.

So what Dave did, he replaced my old steel wishbones for STI Aluminium ones, installed Whiteline uprated front antirollbar 22mm and aluminium whiteline droplinks. Along with that inner&outer tie rods were replaced on both sides and both ball joints needed to be replaced.

There is lot of things that I would have probably missed if attempted to fix it myself, so I would like to thank Dave once again for taking such a good care of her.
 
I am incredibly happy to have her back, will post picture of her as soon as i get my phone charged
 

Attachments

  • uploadfromtaptalk1421515040823.jpg
    uploadfromtaptalk1421515040823.jpg
    132.3 KB · Views: 30
  • uploadfromtaptalk1421515064385.jpg
    uploadfromtaptalk1421515064385.jpg
    106.3 KB · Views: 32
  • uploadfromtaptalk1421515049681.jpg
    uploadfromtaptalk1421515049681.jpg
    127.2 KB · Views: 29
  • uploadfromtaptalk1421515040823.jpg
    uploadfromtaptalk1421515040823.jpg
    132.3 KB · Views: 30
  • uploadfromtaptalk1421515064385.jpg
    uploadfromtaptalk1421515064385.jpg
    106.3 KB · Views: 32
  • uploadfromtaptalk1421515049681.jpg
    uploadfromtaptalk1421515049681.jpg
    127.2 KB · Views: 29
Adding new pic of the car with new color wheel, i thing dark suits her better. You can also see i am missing the side skirt, which i will put back on as soon as i get the fender fixed, need to pass nct in few weeks, so i will only fiberglass and kit it and spray red so it passes, then when i get back some more money, will change the whole fender
 

Attachments

  • uploadfromtaptalk1421525043587.jpg
    uploadfromtaptalk1421525043587.jpg
    993 KB · Views: 27
  • uploadfromtaptalk1421525043587.jpg
    uploadfromtaptalk1421525043587.jpg
    993 KB · Views: 27
So, today I finally had chance to work on her and fix few bits. This is not finished yet, as I will change the whole fender, but this should pass nct. Will add mudflap and side skirt and should be good to go...
 

Attachments

  • WP_20150124_003.jpg
    WP_20150124_003.jpg
    1.3 MB · Views: 14
  • WP_20150124_19_24_24_Pro.jpg
    WP_20150124_19_24_24_Pro.jpg
    1.6 MB · Views: 19
  • WP_20150124_18_23_05_Pro.jpg
    WP_20150124_18_23_05_Pro.jpg
    1.3 MB · Views: 15
  • WP_20150124_004.jpg
    WP_20150124_004.jpg
    1.1 MB · Views: 12
  • WP_20150124_003.jpg
    WP_20150124_003.jpg
    1.3 MB · Views: 14
  • WP_20150124_002.jpg
    WP_20150124_002.jpg
    995.5 KB · Views: 17
  • WP_20150124_19_24_24_Pro.jpg
    WP_20150124_19_24_24_Pro.jpg
    1.6 MB · Views: 19
  • WP_20150124_18_23_05_Pro.jpg
    WP_20150124_18_23_05_Pro.jpg
    1.3 MB · Views: 15
  • WP_20150124_004.jpg
    WP_20150124_004.jpg
    1.1 MB · Views: 12
  • WP_20150124_002.jpg
    WP_20150124_002.jpg
    995.5 KB · Views: 17
:thumbsup: good man :thumbsup: you should use p38 easy sand filler instead of the fibreglass filler as it's just for bridging holes :thumbsup:
 
Back
Top