Clutch Replacement
- Thread starter L444MCA
- Start date
Depends on what’s being done . Is it just the clutch ?
No flywheel skim ?
No rear crank seal ?
No pinion bearing ?
No new gearbox oil ?
Would advise replacing all of the above if not done recently ,
Labour only your looking at 350 euros up depending on what else I’d being done
No flywheel skim ?
No rear crank seal ?
No pinion bearing ?
No new gearbox oil ?
Would advise replacing all of the above if not done recently ,
Labour only your looking at 350 euros up depending on what else I’d being done
Thanks for the reply. Have a fair idea of the cost of the other items you mention and as you say be mad not to do them at the same time.
Just that I have read a couple of different figures on how long the job takes from 4.5 to 6 hours and
also a split between those who say dropping the box or removing the engine is the way to go.
Just that I have read a couple of different figures on how long the job takes from 4.5 to 6 hours and
also a split between those who say dropping the box or removing the engine is the way to go.