Brembo discs

[Altezza-Dan]

Would anyone have an old set of 326mm brembo fitment discs lying around with a bit of life on them? I need to send off one of my 2 piece discs to Reyland to get a new set made up, just looking for something that will stop the car and so me a week of two until i get the new ones back.

Cheers

Dan

 

[BazGF8]

Have a set with 2000km on them there 40quid?

 

[Altezza-Dan]

sounds good Baz, do you know what thickness they are, once they are around 28-30mm ill take em.

Cheers

 

[BazGF8]

[quote author=Altezza-Dan link=topic=39522.msg1#msg1 date=1383045733]
sounds good Baz, do you know what thickness they are, once they are around 28-30mm ill take em.

Cheers
[/quote]
Ill check them after lunch today for you

 

[BazGF8]

30mm Dan

 

[BazGF8]

 

[Altezza-Dan]

grand so, let me know when suits you to meet up, ill be over Blanch direction tonight, not sure if thats any use to you?

 

[BazGF8]

[quote author=Altezza-Dan link=topic=39522.msg1#msg1 date=1383060191]
grand so, let me know when suits you to meet up, ill be over Blanch direction tonight, not sure if thats any use to you?
[/quote]

Pmd

 

[Altezza-Dan]

all sorted, thanks for meeting up with me tonight, fair play! Really got me out of a hole, proper club spirit, Karma to ya Baz!

 

[BazGF8]

No bother

 

[Altezza-Dan]

Just my luck they don't fit. Anyone need a set of brembo discs in great nick?

 

[scoobysub]

dan you can have a loan of my discs if they fit yours 330x28

 

[Altezza-Dan]

hmm, all i can do is try, if i could have a lend of them that would be great, i shouldnt need them too long two weeks max i'd say, it depends on the depth of the center bell, the ones i got off BazGF8 were shallower than mine so i couldnt mount the caliper back on as the disc was out too far. Are yours still on the car?

 

[scoobysub]

ye still on the car dan mine have alloy bells that sit in way more that the standard set up dont know if that helps

 

[Altezza-Dan]

i should have really measured mine when i had one off earlier, ill measure it again tomorrow and if you could measure the distance from disc to back of wheel that would be great, i can pop down and take them off for you even! if they are the same

 

[scoobysub]

what way you want to measure

 

[scoobysub]

35mm from the face of ths disc to the face of the bell

 

[Altezza-Dan]

ill get down and measure mine at lunch

 

[Altezza-Dan]

is it 35mm including the little lip that has the bolts in it?

 

[scoobysub]

Yes disk to bell front