Brake set up for 96 V2 RA

[SMITHZER]

I bought these a few years ago cheap and was going to throw them on my BC5 but never got around to it. Currently getting a full refurb and I'm going to slap them on the RA as the stock ones are pants.

I'm not that gifted in the mech side of things so few questions below:

• What discs and pads pair with the calipers and the car.
• Best place to get the mounting adaptors.
• Best braided lines.
• And what backing plates do I use. I believe they are new age but need a bit of tinkering?

Any help or guidance gratefully appreciated.

 

[scoobysub]

294mm discs for the front and they will bolt straight on
Rears will require a 2 pot conversion brackets to work usually available online or scoobyworld not sure on disc size on the rear depending on what diff and handbrake shoesize your running

 

[GORDON GT SERIES II]

Rear discs are 290mm with a 170mm hand brake shoe or should be as they are newage 2 pot calipers in pic