Altezza-Dan
Octane Boostaholics
Throwing this out there to see if anyone would be interested in a swap.
I have a set of 4 pot AP Racing CP660 calipers with mounting brackets, with EBC yellowstuff and 330mm Godspeed 2 piece grooved discs.
Discs need replacing but belss can be re-used to keep cost down. Calipers need the wear plates removed and cleaned up to get them flush again.
I have a spare set of bleed nipples, dust seals were replaced last year so should be still in good condition. I probably have the piston seals there aswell but they shouldnt need replacing on these as they are only about 4-5 years old . Few stone chips on the caliper body so a re-paint if you want to get the brand new. I have 2 sets of replacement decals there for them, standard yellow and red
Few pics:
So would like to swap for anyone that has a spare set of Brembos, discs and pads with no major damage to them. If anyone is interested let me know. They are still on the car
I have a set of 4 pot AP Racing CP660 calipers with mounting brackets, with EBC yellowstuff and 330mm Godspeed 2 piece grooved discs.
Discs need replacing but belss can be re-used to keep cost down. Calipers need the wear plates removed and cleaned up to get them flush again.
I have a spare set of bleed nipples, dust seals were replaced last year so should be still in good condition. I probably have the piston seals there aswell but they shouldnt need replacing on these as they are only about 4-5 years old . Few stone chips on the caliper body so a re-paint if you want to get the brand new. I have 2 sets of replacement decals there for them, standard yellow and red
Few pics:
So would like to swap for anyone that has a spare set of Brembos, discs and pads with no major damage to them. If anyone is interested let me know. They are still on the car