Prodrive settings

scoobyke

Well-known member
Found these settings

Prodrive Settings

Front camber -1°15’ (-1.25°)
Front toe total 0°00’ (0.00°)
Rear toe 0°06’ (0.1°) per wheel toe in [0°12’ (0.2°) total toe in]

Note: sometimes the front camber figure isn't achievable in which case set it to max. negative equal.
 
Hello Rob,

I am not up on these geo settings at all, would these wreck your tyres in a short period of time :ponder:

Cheers,

Michael
 
Ive a few different ones I was ment to dig out :oops:

I had it on my car and it did wreak the tyres vry quickly. But by christ it works.
 
obviously it depends which car you have? surely classic and newage would have different geometry
 
Hello Lads,

I only ask, as I am looking for some settings for the S204. She pulls ever so slightly to the left at high speed and need so settings to give to Advance Tyres when getting it tracked :thumbsup:

But I do not want to be putting tyres on all the time as its my daily driver :thumbsup:

Cheers,

Michael
 
well i managed to track those settings from scoobnet...
then i have another set from Bob rawle... :D
 
that degree of front camber will chew the inside of your front tyres but you can run it much higher, as renno says it makes a big difference

:thumbsup:
 
Back
Top