Mad Paddy RS
Octane Boostaholics
Anyone know we're I can get the adopter unit for oil temp,pressure unit
Have sensors,but missing the adaptor
Need it urgently
Have sensors,but missing the adaptor
Need it urgently
Defi adaptor
- Thread starter Mad Paddy RS
- Start date
OP
OP
Mad Paddy RS
Octane Boostaholics
Thanks
Rob Spec C
Octane Boostaholics
This: http://www.scoobyparts.com/acatalog/copy_of_LMA_.html
And this: http://www.scoobyparts.com/acatalog/LMA_FITTING_KIT.html
First link used for the temp sensor into the sump, 2nd one for the pressure into cylinder 3. I know the 2nd one says oil pressure and oil temp but both defi sensors wont fit. Best not anyway as the oil temp in that kit will never be accurate as there would be no flow over it.
And this: http://www.scoobyparts.com/acatalog/LMA_FITTING_KIT.html
First link used for the temp sensor into the sump, 2nd one for the pressure into cylinder 3. I know the 2nd one says oil pressure and oil temp but both defi sensors wont fit. Best not anyway as the oil temp in that kit will never be accurate as there would be no flow over it.
Rob Spec C
Octane Boostaholics
The sandwich plate tein uk supply is mad money so wouldn't even bother, think it was £75 from memory.
OP
OP
Mad Paddy RS
Octane Boostaholics
Its the sender unit adapter M18*1.5 to 1/8npt.
That I need
That I need
davelegacy
Member Number 16
Get small oil pressure adaptor that takes x2. We put factory and defi one in that. So hidden incl wiring under alternator.
Oil temp at blanker cylinder 3.
So then its all hidden incl wiring for both.
Cheap samdwich plates could mean oil leak down line
Oil temp at blanker cylinder 3.
So then its all hidden incl wiring for both.
Cheap samdwich plates could mean oil leak down line
OP
OP
Mad Paddy RS
Octane Boostaholics
I'm looking for. Oil temp for no 3,
Not interested in the sand which plate,due to leak and non accurate readings
Have the rest,just need the above
Not interested in the sand which plate,due to leak and non accurate readings
Have the rest,just need the above
Rob Spec C
Octane Boostaholics
Scoobyparts have that nut, it's the only link I didn't put up. Same nut as in the pressure/temp kit if you just want to plug in the temp. I'd post a link but I'm on the phone.
OP
OP
Mad Paddy RS
Octane Boostaholics
Have it sourced now, £12, pays to know to rite people
davelegacy
Member Number 16
the original oil pressure adaptor in cylinder 3 is the job to receive 1/8 npt sensors