Altezza-Dan
Octane Boostaholics
Anyone know where i can get a set of injectors flow tested and cleaned around Dublin?
Injector flow testing
- Thread starter Altezza-Dan
- Start date
Fuel Injection Services Ltd
24 Ossory rd Nth Strand 3 Co. Dublin
Phone: +353 (01)8366897
Give them a call Dan
24 Ossory rd Nth Strand 3 Co. Dublin
Phone: +353 (01)8366897
Give them a call Dan
Animal spec-c
Petrolheads
maybe lateral performance would be your best bet ,not all injector places are equipped the same to deal with high performance injectors could save you time and money in the long run
Yeah I'm not sure about above
Just collected a injector that was reflowed for a 300c there before that is how I knew it
But it did look very professional lots of fancy machinery and stuff
Just collected a injector that was reflowed for a 300c there before that is how I knew it
But it did look very professional lots of fancy machinery and stuff
OP
OP
Altezza-Dan
Octane Boostaholics
[quote author=Animal spec-c link=topic=40397.msg460521#msg460521 date=1389824648]
maybe lateral performance would be your best bet ,not all injector places are equipped the same to deal with high performance injectors could save you time and money in the long run
[/quote]
I got them from lateral! just want to find out what cc they are, her said between 700-800cc! Wouldnt like to know a bit more accurately than that before i use them, Do you need to know the size of injectors for mapping purposes or it should be obvious when getting mapped?
maybe lateral performance would be your best bet ,not all injector places are equipped the same to deal with high performance injectors could save you time and money in the long run
[/quote]
I got them from lateral! just want to find out what cc they are, her said between 700-800cc! Wouldnt like to know a bit more accurately than that before i use them, Do you need to know the size of injectors for mapping purposes or it should be obvious when getting mapped?
Animal spec-c
Petrolheads
[quote author=Altezza-Dan link=topic=40397.msg460528#msg460528 date=1389825142]
[quote author=Animal spec-c link=topic=40397.msg460521#msg460521 date=1389824648]
maybe lateral performance would be your best bet ,not all injector places are equipped the same to deal with high performance injectors could save you time and money in the long run
[/quote]
I got them from lateral! just want to find out what cc they are, her said between 700-800cc! Wouldnt like to know a bit more accurately than that before i use them, Do you need to know the size of injectors for mapping purposes or it should be obvious when getting mapped?
[/quote]
from what i gather say there 800cc they may only flow 700cc @85% mark is very helpfull and since he supplied them im sure he wouldnt be too hard on ya flow matching/testing them and postage wouldnt be crazy as there small, no disrespect to and irish companies but i rather by a set the was flow matched by lateral performance than john doe injector services dublin
[quote author=Animal spec-c link=topic=40397.msg460521#msg460521 date=1389824648]
maybe lateral performance would be your best bet ,not all injector places are equipped the same to deal with high performance injectors could save you time and money in the long run
[/quote]
I got them from lateral! just want to find out what cc they are, her said between 700-800cc! Wouldnt like to know a bit more accurately than that before i use them, Do you need to know the size of injectors for mapping purposes or it should be obvious when getting mapped?
[/quote]
from what i gather say there 800cc they may only flow 700cc @85% mark is very helpfull and since he supplied them im sure he wouldnt be too hard on ya flow matching/testing them and postage wouldnt be crazy as there small, no disrespect to and irish companies but i rather by a set the was flow matched by lateral performance than john doe injector services dublin
Animal spec-c
Petrolheads
[quote author=SCOOBYCOLM link=topic=40397.msg460526#msg460526 date=1389824797]
Yeah I'm not sure about above
Just collected a injector that was reflowed for a 300c there before that is how I knew it
But it did look very professional lots of fancy machinery and stuff
[/quote]
kenc had an irish company try flow match a set for him and the machine he used was not right and i think the machine actually broke down,not saying there all the same but ill stick to what i know not take a chance here with anything really im sure they could be done here maybe im too paranoid :whip:
Yeah I'm not sure about above
Just collected a injector that was reflowed for a 300c there before that is how I knew it
But it did look very professional lots of fancy machinery and stuff
[/quote]
kenc had an irish company try flow match a set for him and the machine he used was not right and i think the machine actually broke down,not saying there all the same but ill stick to what i know not take a chance here with anything really im sure they could be done here maybe im too paranoid :whip:
OP
OP
Altezza-Dan
Octane Boostaholics
[quote author=Animal spec-c link=topic=40397.msg460550#msg460550 date=1389826782]
[quote author=Altezza-Dan link=topic=40397.msg460528#msg460528 date=1389825142]
[quote author=Animal spec-c link=topic=40397.msg460521#msg460521 date=1389824648]
maybe lateral performance would be your best bet ,not all injector places are equipped the same to deal with high performance injectors could save you time and money in the long run
[/quote]
I got them from lateral! just want to find out what cc they are, her said between 700-800cc! Wouldnt like to know a bit more accurately than that before i use them, Do you need to know the size of injectors for mapping purposes or it should be obvious when getting mapped?
[/quote]
from what i gather say there 800cc they may only flow 700cc @85% mark is very helpfull and since he supplied them im sure he wouldnt be too hard on ya flow matching/testing them and postage wouldnt be crazy as there small, no disrespect to and irish companies but i rather by a set the was flow matched by lateral performance than john doe injector services dublin
[/quote]
They are new and unused since i got them from lateral, he said they are flow matched to each other, i was just curious what cc they actually are
[quote author=Altezza-Dan link=topic=40397.msg460528#msg460528 date=1389825142]
[quote author=Animal spec-c link=topic=40397.msg460521#msg460521 date=1389824648]
maybe lateral performance would be your best bet ,not all injector places are equipped the same to deal with high performance injectors could save you time and money in the long run
[/quote]
I got them from lateral! just want to find out what cc they are, her said between 700-800cc! Wouldnt like to know a bit more accurately than that before i use them, Do you need to know the size of injectors for mapping purposes or it should be obvious when getting mapped?
[/quote]
from what i gather say there 800cc they may only flow 700cc @85% mark is very helpfull and since he supplied them im sure he wouldnt be too hard on ya flow matching/testing them and postage wouldnt be crazy as there small, no disrespect to and irish companies but i rather by a set the was flow matched by lateral performance than john doe injector services dublin
[/quote]
They are new and unused since i got them from lateral, he said they are flow matched to each other, i was just curious what cc they actually are
Animal spec-c
Petrolheads
[quote author=Altezza-Dan link=topic=40397.msg460561#msg460561 date=1389827788]
[quote author=Animal spec-c link=topic=40397.msg460550#msg460550 date=1389826782]
[quote author=Altezza-Dan link=topic=40397.msg460528#msg460528 date=1389825142]
[quote author=Animal spec-c link=topic=40397.msg460521#msg460521 date=1389824648]
maybe lateral performance would be your best bet ,not all injector places are equipped the same to deal with high performance injectors could save you time and money in the long run
[/quote]
I got them from lateral! just want to find out what cc they are, her said between 700-800cc! Wouldnt like to know a bit more accurately than that before i use them, Do you need to know the size of injectors for mapping purposes or it should be obvious when getting mapped?
[/quote]
from what i gather say there 800cc they may only flow 700cc @85% mark is very helpfull and since he supplied them im sure he wouldnt be too hard on ya flow matching/testing them and postage wouldnt be crazy as there small, no disrespect to and irish companies but i rather by a set the was flow matched by lateral performance than john doe injector services dublin
[/quote]
They are new and unused since i got them from lateral, he said they are flow matched to each other, i was just curious what cc they actually are
[/quote]
drop mark a mail im sure he can give you the info you require
[quote author=Animal spec-c link=topic=40397.msg460550#msg460550 date=1389826782]
[quote author=Altezza-Dan link=topic=40397.msg460528#msg460528 date=1389825142]
[quote author=Animal spec-c link=topic=40397.msg460521#msg460521 date=1389824648]
maybe lateral performance would be your best bet ,not all injector places are equipped the same to deal with high performance injectors could save you time and money in the long run
[/quote]
I got them from lateral! just want to find out what cc they are, her said between 700-800cc! Wouldnt like to know a bit more accurately than that before i use them, Do you need to know the size of injectors for mapping purposes or it should be obvious when getting mapped?
[/quote]
from what i gather say there 800cc they may only flow 700cc @85% mark is very helpfull and since he supplied them im sure he wouldnt be too hard on ya flow matching/testing them and postage wouldnt be crazy as there small, no disrespect to and irish companies but i rather by a set the was flow matched by lateral performance than john doe injector services dublin
[/quote]
They are new and unused since i got them from lateral, he said they are flow matched to each other, i was just curious what cc they actually are
[/quote]
drop mark a mail im sure he can give you the info you require
OP
OP
Altezza-Dan
Octane Boostaholics
Looking back at my emails from Mark, he says these flow circa 800-900cc, bit bigger than i thought! They will probably just run at a fairly low injector duty cycle %
Mad Paddy RS
Octane Boostaholics
lateral/ zen will do them
[quote author=SCOOBYCOLM link=topic=40397.msg460514#msg460514 date=1389823704]
Fuel Injection Services Ltd
24 Ossory rd Nth Strand 3 Co. Dublin
Phone: +353 (01)8366897
Give them a call Dan
[/quote]
as far I know Dessie only deals with diesel fuel systems, Westward do and martin I always find sound to deal with.
Fuel Injection Services Ltd
24 Ossory rd Nth Strand 3 Co. Dublin
Phone: +353 (01)8366897
Give them a call Dan
[/quote]
as far I know Dessie only deals with diesel fuel systems, Westward do and martin I always find sound to deal with.
Had a feeling you'd know the answer
That answers that so
[quote author=larSTI8 link=topic=40397.msg460788#msg460788 date=1389909164]
[quote author=SCOOBYCOLM link=topic=40397.msg460514#msg460514 date=1389823704]
Fuel Injection Services Ltd
24 Ossory rd Nth Strand 3 Co. Dublin
Phone: +353 (01)8366897
Give them a call Dan
[/quote]
as far I know Dessie only deals with diesel fuel systems, Westward do and martin I always find sound to deal with.
[/quote]
That answers that so
[quote author=larSTI8 link=topic=40397.msg460788#msg460788 date=1389909164]
[quote author=SCOOBYCOLM link=topic=40397.msg460514#msg460514 date=1389823704]
Fuel Injection Services Ltd
24 Ossory rd Nth Strand 3 Co. Dublin
Phone: +353 (01)8366897
Give them a call Dan
[/quote]
as far I know Dessie only deals with diesel fuel systems, Westward do and martin I always find sound to deal with.
[/quote]