Flywheel question

I am just wondering if anyone can answer a question for me
The time has come to change the clutch on the legacy which has a dual mass flywheel which give trouble on this model legacy. Now from doing a bit of reading up on it I can put a single mass flywheel
From 06/07 5 speed impreza which is what all the lads in the states use supposedly
Now taking into consideration the Us legacys are 2.5 and mine is a 2.0 both 5 speed
Legacy dan sent me a link to a clutch and flywheel kit from exedy for it

Now I can get a 06/07 impreza clutch and flywheel kit from the uk for 610 euro including lightened flywheel and a stage 1 clutch providing it fits

Now this is we're I need somebody's help
I will put up 2 links one for the legacy kit and one for the impreza now at the top of each link you will see 4 options just click the one for the single mass and then on the right hand side of the page it should give the spec of each now to me the both flywheel specs are the same so in theory it should fit but I just need to be 100%

Legacy clutch
http://clutchfinder.exedy.com.au/


Impreza clutch
http://clutchfinder.exedy.com.au/

Sorry folks just checked the links and they dont take you to the right page
So I will just put the flywheel specs here

Ok legacy flywheel spec
Size x spline od x teeth. 230 x 25.2 x 24
Flywheel profile. -2.0mm


Impreza flywheel spec

Size x spline od x teeth. 230 x 25.2 x 24
Flywheel profile. -2.0 mm

So to me it looks like the impreza flywheel fits but just need to be 100% before I order it

Can anyone tell me if it should fit