advice on trackin set up for a classic scooby

as above any1 got settings for tracking on a classic i heard on the front camber 1.5degrees negative to help under steer any1 got rear tow and front tow settings

Here's what I got from whiteline website



Suggested Wheel Alignment Settings Handling Pack Sports Pack Race Pack

Settings only acheivable with Whiteline alignment kits

front Camber (4) - degrees -0.75 to -1.25 -1.25 to -2.25 -2.25 to -4
front Caster - degrees max max max
front Toe - mm/side 0 0 0

rear Camber (4) - degrees -1 to -1.25 -1.25 to -2 -2 to -3
rear Caster - degrees n/a n/a n/a
rear Toe - mm/side -0.5 -0.7 -1

Ran prodrive settings at the last trackday.Transformed turn in on the classic

Prodrive Settings

Front camber -1°15’ (-1.25°)
Front toe total 0°00’ (0.00°)
Rear toe 0°06’ (0.1°) per wheel toe in [0°12’ (0.2°) total toe in]

Note: sometimes the front camber figure isn't achievable in which case set it to max. negative equal.