wagon dec
Member Number 257
found this on the nasioc site was having issues with my own car lately the boost had tailed off by about .3 bar when i got it mapped it was set up at 1.1bar and was pulling grand then over the past few months it started dropping and was only boosting at .8 bar tried a few things then started to put it down to fuel causing knock and pulling boost back but tried booster in it and reset the ecu ,but no change so had a look on the net and found this tried it and found that the actuator arm on my car had no preload at all spring must be gone a bit weak so did this to mine and now im gettin 1.2 peak and holdin 1.1bar so delight simple free fix just taught id share it
http://forums.nasioc.com/forums/showthread.php?t=824323
http://forums.nasioc.com/forums/showthread.php?t=824323