Standard Subaru headunit removal

frostyjack

Sunday Drivers
Hey guys does anyone know if there any instructions online for removing the Subaru headunit from it's mount without damaging the surround. The standard one is pretty garbage and was thinking of upgrading to one with USB.
 
remove the panel around the gear stick ,, just pops out ,

then remove 2 screms visable below heater conrols , then this panel pops off leaving the heater controls visable along with the radio ,

remove the pocket and radio by undoing 4 screws then disconnect aerial and conectors from back of radio and remove headunit from pocket , 2 screws i think in the sides ,

takes about 5 minutes all in
 
Nice one Tommy, do you need a Facia to swap a single Din replacement or can it just slip in on top of the pocket that is currently there?

Thanks again. :icon_pray:
 
i fitted a pioneer head unit and it just fits in exactly the same place , no messin or fasias needed , once ya pop the panel off at the gear stick its straight forward as you will see what needs doin
 
Back
Top