Fitting read brembos

Legy C

Petrolheads
Howdy Lads
Im changing to rear brembos, EBC discs & Braided hoses at home later on.

I have
2Nº 316mm EBC Discs
2Nº brembo calipers c/w yellow stuff pads
2Nº Braided hoses
Adapter brackets & modified brake shoes.
1.0l dot 4 fluid ( for top up not full change)

Would ye recommend a full fluid change, or is just unnecessary work? :ponder:
I will probably stick with dot4 as im getting relaxed with age so don’t thrash the car for hrs on end anymore. :zzzz: :zzzz:

Will I loose much fluid while changing the hoses ?

What’s the correct procedure? (any tips) seems to be plain sailing but thats when bad things usually happen :icon_cry:
Am I missing anything :dontknow:

Thanks :thumbsup:
 
You wont lose much fluid if you have hose clamps (about €6 in halfords) you may need new copper washers for the banjo bolts on the calipers, and when your bleeding them bleed the inside bleed nipple first then the outside :thumbsup:


Oh just noticed your changing the hoses, so clamps wont help, you will lose a bit of fluid so :thumbsup:
 
Back
Top