Det Alarm fitted today

AndyC

Well-known member
ISDC Club Member
I bought this thing from a guy off Scoobynet. He has sold loads to members on there. Its basically a KnockLink but he claims its better. It was cheaper than a Knock Link so I decided to try it. Started fitting it this morning. Nothing really too difficult. All the instructions are straight forward.

This is the place you fit the Knock Sensor. This is the spare hole to mount it.
2qsnfqu.jpg

4cx98vc.jpg


This is the New/Second BOSCH Knock Sensor fitted to a spare hole in the engine. It just below the intercooler in the middle.
2ura3qh.jpg


This is the Control Box for the unit. I mounted it on the back of the dash surround out of site.
33fg4g0.jpg


These are the markings for the holes to allow the LEDs to pop through.
2q1feq9.jpg


Ready to fit back on car.
48whkiu.jpg


Finished
47m8do6.jpg

33blf1d.jpg


The red LED on the left shows the unit is powered up and monitoring for knock. I had my sister tap the knock sensor with a screw driver and all the LEDs lit up.
2vkf1c9.jpg


Im off out for a drive now!  :subaru:
 
£86 delivered
E129

Gave the car a good drive and only the first 2 green LEDs lit up at 1.35BAR. So happy days.
 
[quote author=Anton M link=topic=1492.msg12938#msg12938 date=1171047054]
Is that a Rally Car with a No.3 in the background? :wazzup:
[/quote]

Ha Ha thats the model car I have up on the dash.
351irs2.jpg
 
Back
Top